Wax-Based, Slow-Drying Lubricant for Pulling Wire & Cable

  • Maximum Friction Reduction Lowers pulling tension and increases installation distances.
  • Temperature Stable Can be applied at higher temperatures without separating.
  • Slow Drying Longer time for pulling jobs in high temperatures.
  • Compatible* Suitable for most cable jackets.
  • High Cling Factor Stays on cable jacket.
  • UL and CSA Listed Appropriate for NEC installations.

* Contact American Polywater® for specific recommendations on LSZH/LSHF or CSPE cable jacket types.


Polywater® WX Wax-Base Cable Pulling Lubricant is a significant improvement over older style wax pulling lubricants. It is temperature stable and does not liquefy and drip off after high-temperature exposure. Polywater® WX Wax Lube is clean and slow drying. It leaves less residue in the conduit to block future cable pulls or removal.

Polywater WX Wax Lube is environmentally safe and non-toxic. Unlike many wax pulling lubricants, it is compatible* with a broad variety of cable jackets, including polyethylene types.

Request a Quote Sign Up for Updates Resources

Product/Package Notes:

Polywater WX Lubricant is intended for easy hand application. It can also be pumped using the LP-D5 Drill-Powered Pump (see below resources).
Polywater® WX Wax-Base Cable Pulling Lubricant
Catalog # Package Description Units/Case
WX-35 1-quart/0.95-liter bottle 12
WX-128 1-gal/3.8-liter pail 4
WX-640 5-gal/18.9-liter pail 1

Request a Quote Sign Up for Updates