Pourable Liquid Lubricant for
Communications Cable Pulling

  • Superior Friction Reduction For lower tension cable pulls.
  • Easy to Apply Pour into innerducts and feeder tubes.
  • Compatible with Cable Jackets, Including PE No jacket weakening or cracking issues.
  • Meets California CCR 22 Fathead Minnow Screen No disposal issues.  Not a CA hazardous waste.
  • Wets Out and Covers PE Jackets Provides thorough lubrication on long pulls.

Polywater® Lubricant CPL is a high-performance, pourable liquid cable pulling lubricant formulated specifically for the communications industry. It is recommended for long fiber optic, copper-paired or coaxial cable pulls.

Polywater CPL provides maximum friction reduction between cable and conduit under both low and high sidewall bearing pressures. It is slow drying and leaves a lubricating film after its water base has evaporated. Polywater CPL is a liquid lubricant and can be applied by pouring into an up-turned duct or funnel.

Polywater CPL is safe for the aquatic environment. It meets California regulation CCR 22. Polywater CPL is suitable for use on PE communication cable jackets.

Request a Quote Resources


Product/Package Notes:

Polywater CPL comes in two grades: Regular Grade CPL and Winter Grade WCPL (for cold weather use in temperatures as low as -20°F (-30°C)). The packages (with the exception of the drum) are all designed to allow the lubricant to be poured into upturned innerduct or a feeder tube.
Polywater CPL Communications Cable Pulling Lubricant
Catalog # Catalog #
(Winter Grade)
Package Description Units/Case
--- WCPL-35 1-quart/0.95-liter squeeze bottle 12
CPL-128 WCPL-128 1-gallon/3.8-liter jug 4
CPL-320 WCPL-320 2.5-gallon/9.6-liter pail 2
CPL-640 WCPL-640 5-gallon/18.9-liter pail 1

Request a Quote