Polywater® WX Wax-Base Pulling Lubricant
Wax-Based, Slow-Drying Lubricant for Pulling Wire & Cable
Polywater® WX Wax-Base Cable Pulling Lubricant is a significant improvement over older-style wax pulling lubricants. It is temperature stable and does not liquefy and drip off after high-temperature exposure. Polywater® WX Wax Lube is clean and slow drying. It leaves less residue in the conduit to block future cable pulls or removal. Polywater WX Wax Lube is environmentally safe and non-toxic. Unlike many wax pulling lubricants, it is compatible with a broad variety of cable jackets, including polyethylene types.
Lowers pulling tension while increasing installation distance
Withstands storage in hot environments or exposure to multiple freeze thaw cycles without separating and becoming watery and unusable
Suitable for most cable jackets, including polyethylene types
EASY TO APPLY
Can be applied by hand because of its thick gel formulation
UL Listed and ULC Listed to Canadian Standards
Friction Testing: Shows excellent lubricity on a variety of cable jacket types. Using PVC conduit, the following COFs were measured: XLPE .07, PVC .10. Method based on Polywater’s Friction Table described in Technical Talk 2007.
Coats and clings to cable. A 6-inch length (152 mm) of a 1-inch (25 mm) diameter cable will hold at least 125 grams of Polywater Lubricant WX for one minute when held vertically at 70°F (21°C).
It is compatible with most wires and polyethylene-jacketed cables.
|Catalog #||Package description||Units/Case|
How To Purchase Polywater Products
Our wide range of products serving the global communications and electrical industries are available through our team of manufacturing representatives. Ready for pricing and purchasing information from your local representative?
We’ve Got The Answers You Need
Our team members can guide you through your planning process, any challenges or answer specific product questions.