American Polywater Logo -- click to return to homepage white space
Web Site Search

Pulling Lubricants Blowing Lubricants Cable Cleaners Cable Pulling Software
Sealants Adhesives MRO Aerosols Free Training & Product Demonstration Videos Calculators
Home | About | Literature | Site Map | MSDS | Contact | Engineers | Shows | Links | Samples | RFQ | Catalog Numbers

Fans Fiber Fast!

Polywater®
SqueekyKleen
Communications Cleaner

A specially formulated cleaner for removing pik and cable gels from loose-tube and ribbon fiber in preparation for splicing.

Hear the difference!

SqueekyKleen™ Communications Cleaner -- Preps cable for splicing. Cleans off pik and fans loose-tube or ribbon fiber in two wipes without alcohol.


SqueekyKleen™ Communications Cleaner -- Preps cable for splicing. Cleans off pik and fans loose-tube or ribbon fiber in two wipes without alcohol.
  • Cleans off pik without the use of alcohol
  • Minimal wiping (2 wipes only)
  • No residue
  • Safe to use on ribbon fiber
  • Fans fiber quickly
  • Cleans fiber squeaky clean
  • Tested and approved

New SqueekyKleen cleans and fans fiber in two wipes without alcohol, saving time and money.   Hear the difference!   No follow-up with alcohol required to get fibers squeaky clean and separated when prepping for splicing.   SqueekyKleen is less harsh on hands and reduces chemical odors and vapor concentrations to a minimum in splice trailers and vaults.   SqueekyKleen's unique formulation and specially designed high-performance towelette work to remove pik from the entire surface of loose-tube or ribbon fibers, leaving no residue.   SqueekyKleen helps keep splice equipment clean of contamination for better fiber alignment and splice quality.   Safe on acrylate and Mylar®.

Specifications

Cleaning:   When wiping a 3-foot section of 12-count fiber from a buffer tube, the pre-saturated towel will squeak and fan fibers with 2 wipes.

Solvency Power:   At 68° F (20°C), will dissolve .020" (.5mm) film of PE/PJ or ETPR grease completely from cable jacket with less than two minutes of vigorous agitation (no wiping).

Residue:   When placed on a clean glass panel and dried, the solvent shall not leave any visible residue (<100 ppm).

Water Content:   When tested by the ASTM 1533B method, water content shall be less than 75 ppm.

Flash Point:   When tested via a Pensky-Martin Closed Cup Test (ASTM D93), the cleaner shall have a flash point above 140°F.

CATALOG NUMBERS
Code Package Size Units/CS Image
TC-1 Individual saturated wipe 144 SqueekyKleen™ Communications Cleaner -- Cleans off pik and fans loose-tube or ribbon fiber in two wipes without alcohol
TC-1D42 42 TC-1 in a dispenser pack 1
TC-16LF 1-pint (475 ml) bottle with flip top 12
TC-16LR 1-pint (475 ml) bottle with sprayer 12
TC-35LF 1-quart (.95 liter) bottle with flip top 12
TC-35LR 1-quart (.95 liter) bottle with sprayer 12
TC-128 1-gallon (3.8 liters) bottle 4
TC-384 3 gallons (11.4 liters) in a 5-gallon pail 1
TC-640 5-gallon (18.9 liters) pail 1
TC-96 3-quart (2.85liters) in a 1-gallon pail 4
TC-D65 65-Count Wipe Canister 6
TC-D65DRY 65-Count Dry Wipe Canister 6
TC-DRUM 55 gallons (209 liters) in a 55-gallon drum 1

Important Notice: The statements and information here are made in good faith based on tests and observations we believe to be reliable. However, the completeness and accuracy of the information is not guaranteed. Before using, the end-user should conduct whatever evaluations are necessary to determine that the product is suitable for the intended use. The user assumes all risks and liability in connection with such use. The statements contained herein are made in lieu of all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, which warranties are hereby expressly disclaimed. American Polywater's only obligation shall be to replace such quantity of the product proven to be defective. Except for the replacement remedy, American Polywater shall not be liable for any loss, injury or damage, direct or indirect, arising from the use or the failure to properly use these products, regardless of the legal theory asserted. The foregoing may not be altered except by a written agreement by the officers of American Polywater Corporation.

Click for an MSDS on this product

View flyer in PDF Format or Français or Chinese

Click here to Add Your Name To Our Mail List

Click here to Request a Quote on This Product

View Product Testing & Evaluation from Verizon

View Testing & Approval from Corning Cable Systems

2-Minute Video: See and Hear the Difference for yourself

View a Demonstration Video on SqueekyKleen (in CHINESE)

ARRA Buy American Compliant
ARRA Buy American Compliant
MadeInAmerica.com Listed
MadeInAmerica.com Listed
FTC Made In America Qualified
FTC Made In America Qualified

Home | About | Site Map | Literature | Samples | Links | Reps | Videos | Pumps | RFQ
Codes | Engineering | Shows | Spotlight | Newsletters | MSDS | Translations | Contacts | Jobs


American Polywater Corporation -- The world's leading manufacturer of cable pulling lubricants, cable cleaners, and MRO & construction chemicals.
P.O. Box 53 | Stillwater, MN 55082 USA
1-(651) 430-2270 (Voice) | 1-(651) 430-3634 (Fax)
1-(800) 328-9384 (Toll-Free US/Canada Only)

Copyright © 2001 - 2012 American Polywater Corporation | Polywater Updated 1/19/121/19/12