Web Site Search

Non-Conductive! SpliceMaster® Sanding Cloth For Cable Cleaning

• NON-CONDUCTIVE - Leaves no conductive grit that could lead to tracking or arcing.
  
• DURABLE - Cloth backing resists shredding. Outlasts sandpapers.
  
• CONVENIENT - Compact roll dispenses and stores easily.
  
• ECONOMICAL - Unravel and snip only the needed amount. Eliminates waste.
  
• EASY TO USE - Inch-wide cloths perfectly sized for "shoe-polishing" hand motions.
  
• SYSTEM APPROACH - Part of the SpliceMaster® Cable Cleaners system.

SpliceMaster® Sandpaper Rolls contain 50 yards of 1-inch-wide non-conductive aluminum oxide sanding cloth for removing semi-con shield residue, jacket polymers, and other contaminating materials from electrical cable insulation during splicing. Such deposits must be removed prior to splicing electrical cable since they can lead to tracking or arcing. Standard, store-bought sandpapers and abrasives can leave conductive grit residues that could lead to cable failure and hazardous conditions. Only non-conductive sanding materials should be used. NEVER ABRADE AN ENERGIZED CABLE.

Catalog No.	Description	Units/CS	Image
SP-ROLL	1-inch x 50-yard roll of 120-grit non-conductive aluminum oxide sanding cloth.	1

Important Notice: The statements and information here are made in good faith based on tests and observations we believe to be reliable. However, the completeness and accuracy of the information is not guaranteed. Before using, the end-user should conduct whatever evaluations are necessary to determine that the product is suitable for the intended use. The user assumes all risks and liability in connection with such use. The statements contained herein are made in lieu of all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, which warranties are hereby expressly disclaimed. American Polywater's only obligation shall be to replace such quantity of the product proven to be defective. Except for the replacement remedy, American Polywater shall not be liable for any loss, injury or damage, direct or indirect, arising from the use or the failure to properly use these products, regardless of the legal theory asserted. The foregoing may not be altered except by a written agreement by the officers of American Polywater Corporation.

ARRA Buy American Compliant

MadeInAmerica.com Listed

FTC Made In America Qualified

P.O. Box 53 | Stillwater, MN 55082 USA
1-(651) 430-2270 (Voice) | 1-(651) 430-3634 (Fax)
1-(800) 328-9384 (Toll-Free US/Canada Only)

Copyright © 2001 - 2013 American Polywater Corporation | 3/20/13