Water-Free Cleaning Wipe For
HDPE Fusion and Butt Splicing

  • 99.8% Anhydrous Isopropyl Alcohol – Highest alcohol content in the pipeline industry ensures residue free cleaning.
  • Large Cleaning Wipe – More cleaning per wipe.
  • Good Solvency – Removes mud, dirt, and other contaminants from elbows, T’s, saddles, and MET fittings.
  • Effective Cleaner – More consistent and stronger HDPE fusion splices.
DSC_0352

Polywater® EFW™ wipes clean larger areas

Polywater® EFW Electro Fusion Wipe cleans the pipe surface of gas, electrical, telecom, water, or sewer PE conduits prior to the electro or butt fusion process.  Installer should have a handy source of  EFW-1 disposable wipes available to avoid reuse/contamination issues.   EFW wipes can clean more area prior to shaving (scraping) the pipe. The wipe can also be used to clean off pipe shavers or any contaminant that could interfere with a good fusion process

 

Product/Package Notes:

The Polywater® EFW wipe contains fast-evaporating, anhydrous alcohol.

An alternative, where VOC regulations do not allow the use of alcohol, is the Polywater® ACE acetone wipe. This water-free solvent wipe also offers excellent cleaning with no residue. Acetone evaporates slightly faster than alcohol.
Catalog # Package Description Units/Case
EFW-1 5-in X 8-in/13-cm X 20-cm wipe in sealed foil pouch 50
ACE-1L 10-in X 12-in/25-cm X 30-cm wipe in sealed foil pouch 100

Address: 11222 60th Street N, Stillwater, MN 55082, USA

Phone: +1 651 430-2270 | Fax: +1 651 430-3634 | Phone: 800 328-9384 (Toll-Free USA/Canada)

General Email: Email Contact Page