Thick Gel Lubricant
Best for Hand Application

  • Clean – Non-staining gel lubricant.
  • Easy – Can be applied by hand.
  • High Cling Factor – Stays on cable jacket during application. 
  • Temperature Stable – No ruined lubricant from freeze/thaw exposure.
  • Stays Lubricated – Will not dry out.
  • UL and CSA Listed – Approved for NEC installations.

* Dyna-Blue® Lubricant is not recommended for LSZH/LSHF and certain CSPE and CPE cable jackets. For these jacket types, Polywater® LZ is the recommended/approved product.

 

Dyna-Blue® Lubricant is a thick, easy-to-apply gel.

Dyna-Blue® Lubricant is a clean, slow-drying, easy-to-apply gel for hand application. It is a thick gel with “clingability” for easy handling and application. Dyna-Blue® combines effectiveness with economy. It is a good lubricant for everyday use in general electrical applications.

Dyna-Blue® Lubricant does not cold flow down vertical conduits.  It wipes cleanly off cables, allowing wire markers to stick.  It dries slippery with <5% residue so cables aren’t “cemented” in the duct.  It is a stable gel that won’t degrade and turn runny in its container over time.

Product/Package Notes:

Polywater® Dyna-Blue® Lubricant can also be pumped using the LP-D5 drill-powered pump (see sidebar).
Polywater® Dyna-Blue® Cable Pulling Lubricant
Catalog # Package Description Units/Case
D-35 1-quart/0.95-liter bottle 12
D-128 1-gal/3.8-liter pail 4
D-640 5-gal/18.9-liter pail 1
D-Drum 55-gal/208-liter drum 1

Address: 11222 60th Street N, Stillwater, MN 55082, USA

Phone: +1 651 430-2270 | Fax: +1 651 430-3634 | Phone: 800 328-9384 (Toll-Free USA/Canada)

General Email: Email Contact Page