Web Site Search

FOR INSIDE WIRING PREMISE Loop™ Cable Pulling Lubricant

From the company that revolutionized the pulling of outside plant communications cable, an easy-to-apply pulling lubricant formulated specially for lightweight fiber-optic, coaxial, and other types of premise data cable.   NOTE: for Category 6 and other data cables susceptible to the "wet link" insertion loss phenomenom, we strongly recommend the use of new Polywater® FTTx Lubricant Wipes instead.   For information on how lubrication affects insertion loss, read our Cat 6 White Paper.

• Low friction on the softer premise cable jackets
  
  
• Thick gel doesn't drip and make a mess
  
  
• Suitable for vertical-up runs at beginning of pull
  
  
• Clean, colorless lube does not stain and ruin carpet, walls, etc.
  
  
• Compatible with a variety of premise cable jackets (including PE types)
  
  
• Temperature stable. Doesn't get thin or runny
  
  
• More suitable for premise cable than electrical or outside plant lubricants
  
  
• Slow drying for continuous lubricity
  
  

ORDERING INFORMATION
Catalog #	Package Size	Units/CS	Image
RL-35	1-quart squeeze bottle (.95 liter)	12
RL-128	1-gallon tub (3.78 liters)	4	None

Important Notice: The statements and information here are made in good faith based on tests and observations we believe to be reliable. However, the completeness and accuracy of the information is not guaranteed. Before using, the end-user should conduct whatever evaluations are necessary to determine that the product is suitable for the intended use. The user assumes all risks and liability in connection with such use. The statements contained herein are made in lieu of all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, which warranties are hereby expressly disclaimed. American Polywater's only obligation shall be to replace such quantity of the product proven to be defective. Except for the replacement remedy, American Polywater shall not be liable for any loss, injury or damage, direct or indirect, arising from the use or the failure to properly use these products, regardless of the legal theory asserted. The foregoing may not be altered except by a written agreement by the officers of American Polywater Corporation.

P.O. Box 53 | Stillwater, MN 55082 USA
1-(651) 430-2270 (Voice) | 1-(651) 430-3634 (Fax)
1-(800) 328-9384 (Toll-Free US/Canada Only)

Copyright © 2001 - 2008 American Polywater Corporation | 1/13/10