Web Site Search

Stop Oil Seepage! PILC Leak Repair System
BEFORE	AFTER

• LESS HAZARDOUS METHOD - Kit eliminates hot lead wiping and heat sources in manhole.
• QUICK PLUGGING ACTION - A fast cure putty stops oil seepage.
  
• PERMANENT SEAL - A quick-curing 2-part paste overcoat forms a permanent seal.
  
• DURABLE - Finished seal is impervious to water, oil, and weather.
  
• FAST - System can plug and seal active leaks in minutes.
  
• CONVENIENT - Kit contains all materials needed to fix leak while in the field.
  

System contains necessary cable prep material for cleaning of cable. Use the PowerPatch® System's 2-part putty stick to block oil leaks. Then make a permanent patch with the fast cure, 2-part paste overcoat. Ensure optimal mix and performance with pre-measured packaging.

Seals punctures or cracks in hard to reach areas. Fixes leaks fast. At 70°F, the putty and sealant harden in about 10 minutes. Repairs made at temperatures as low as 40°F, have a somewhat slower cure. The finished patch is resistant to transformer oil and has held oil pressures in excess of 20 psi.

Preparation is important, and the kit approach provides everything needed to do the job, although in instances of excessive oil leakage or dirt accumulation, separate scrubbing rags such as Grime-Away™ Cleaning Wipes are helpful. Read detailed application instructions before using.

The PowerPatch® Sealant is provided in a kit containing the preparation and patching materials necessary to repair oil leaks in transformers, lead-sheathed cables, potheads, and other oil-filled, electrical equipment. Kits can be customized to end-user requirements.

Important Notice: The statements and information here are made in good faith based on tests and observations we believe to be reliable. However, the completeness and accuracy of the information is not guaranteed. Before using, the end-user should conduct whatever evaluations are necessary to determine that the product is suitable for the intended use. The user assumes all risks and liability in connection with such use. The statements contained herein are made in lieu of all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, which warranties are hereby expressly disclaimed. American Polywater's only obligation shall be to replace such quantity of the product proven to be defective. Except for the replacement remedy, American Polywater shall not be liable for any loss, injury or damage, direct or indirect, arising from the use or the failure to properly use these products, regardless of the legal theory asserted. The foregoing may not be altered except by a written agreement by the officers of American Polywater Corporation.

P.O. Box 53 | Stillwater, MN 55082 USA
1-(651) 430-2270 (Voice) | 1-(651) 430-3634 (Fax)
1-(800) 328-9384 (Toll-Free US/Canada Only)

Copyright © 2001 - 2008 American Polywater Corporation | 5/7/08