Web Site Search

PROVEN Polywater® PJ Pourable Lubricant

Polywater® PJ is a pourable version of the popular Polywater® J High Performance Pulling Lubricant. "PJ" offers the same proven features as "J" in such key areas as lubricity, cable compatibility*, residue fire resistance, and ease of cleanup--yet it's easier to apply where pouring is practical.

Polywater® WPJ (winter grade) has the same characteristics as Polywater® Lubricant PJ and is specially formulated for use in temperatures as low as -20°F (-30°C).

• For the horizontal pulls typical in underground construction, "PJ" pours directly into the feeder or guide funnel, avoiding the mess of hand application. No need to touch or handle the lube . . . less cleanup time!
  
  
• "PJ" is easier to pump than the gel lubricants. It's less strenuous to pump a few gallons into the conduit.
  
  
• "PJ's" viscosity makes it easier to spread the lubricant throughout a conduit, providing effective lubrication at all friction points.

CATALOG NUMBERS
Polywater® PJ	Polywater® WPJ	Package Size	Units/CS	Image
PJ-128	WPJ-128	1 gallon jug (3.8 liters)	4
PJ-320	WPJ-320	2½ gallon jug (9.6 liters)	2
PJ-640	WPJ-640	5 gallon pail (18.9 liters)	1
PJ-DRUM	WPJ-DRUM	55 gallon drum (208 liters)	1	None

*Contact American Polywater for specific recommendations on LSZH or LSHF cable jackets.

Important Notice: The statements and information here are made in good faith based on tests and observations we believe to be reliable. However, the completeness and accuracy of the information is not guaranteed. Before using, the end-user should conduct whatever evaluations are necessary to determine that the product is suitable for the intended use. The user assumes all risks and liability in connection with such use. The statements contained herein are made in lieu of all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, which warranties are hereby expressly disclaimed. American Polywater's only obligation shall be to replace such quantity of the product proven to be defective. Except for the replacement remedy, American Polywater shall not be liable for any loss, injury or damage, direct or indirect, arising from the use or the failure to properly use these products, regardless of the legal theory asserted. The foregoing may not be altered except by a written agreement by the officers of American Polywater Corporation.

P.O. Box 53 | Stillwater, MN 55082 USA
1-(651) 430-2270 (Voice) | 1-(651) 430-3634 (Fax)
1-(800) 328-9384 (Toll-Free US/Canada Only)

Copyright © 2001 - 2008 American Polywater Corporation | 1/28/08