|Home | About | Literature | Site Map | MSDS | Contact | Engineers | Shows | Links | Samples | RFQ | Catalog Numbers|
Antifreeze Gel System
IceFree Antifreeze Gel is a specialty, non-freezing gel that is pumped into conduits (around cable) to prevent water ingress and subsequent ice formation. This system has successfully protected fiber optic cable in thousands of bridge exposures to below freezing temperature for years.
|WS-Drum||55-Gallon Drum IceFree Gel||1||None|
|WS-640||5-Gallon Pail IceFree Gel||1||None|
|WB-8||1 Chemical Duct Block||12||None|
|WH-1||48" Gel Insertion Hose & Valve Assembly||1||None|
View this flyer in PDF Format or Chinese
Click here to view the MSDS for this product
Click here to Request a Quote on this product
Click here to Add Your Name To Our Mail List
Click to view the IceFree Application Instructions
Click to view the IceFree Application Instructions Video
Click here to run the Quantity Calculator on IceFree Gel
Click here to view an article reprint on IceFree Gel from "Outside Plant" magazine
Click here to view an article reprint on IceFree Gel from "America's Network" magazine
Important Notice: The statements and information here are made in good faith based on tests and observations we believe to be reliable. However, the completeness and accuracy of the information is not guaranteed. Before using, the end-user should conduct whatever evaluations are necessary to determine that the product is suitable for the intended use. The user assumes all risks and liability in connection with such use. The statements contained herein are made in lieu of all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, which warranties are hereby expressly disclaimed. American Polywater's only obligation shall be to replace such quantity of the product proven to be defective. Except for the replacement remedy, American Polywater shall not be liable for any loss, injury or damage, direct or indirect, arising from the use or the failure to properly use these products, regardless of the legal theory asserted. The foregoing may not be altered except by a written agreement by the officers of American Polywater Corporation.
Ask for Polywater® products by name at your local authorized distributor.
Site Map |
Codes | Engineering | Shows | Spotlight | Newsletters | MSDS | Translations | Contacts | Jobs
P.O. Box 53 | Stillwater, MN 55082 USA
1-(651) 430-2270 (Voice) | 1-(651) 430-3634 (Fax)
1-(800) 328-9384 (Toll-Free US/Canada Only)
Copyright © 2001 - 2013 American Polywater Corporation | 6/5/13